Showing posts with label Halloween on a budget. Show all posts
Showing posts with label Halloween on a budget. Show all posts

Monday, October 5, 2015

Man eating plant prop

This plant only eats once a year and is fed by the children that didn't use their manners from last Halloween. As you can see this plant does not go hungry. I don't know if it a man eater anymore than an ill mannered child eater.
I created this man eater out of a balloon and paper mache (see my recipe for paper mache paste here) http://tampster1.blogspot.ca/2015/10/haunted-paper-mache-pumpkins.html#.VhKOI_lViko.
So to start this project,  I first covered the base in a few layers of stripping and then took fuller sheets that have been soaked in the paste and folded and manipulated it to form the ridge. 
 The tongue is just the mouth cut out, turned 90 degrees and reattached. The mouth was built up using tinfoil that was rolled into a snake and taped on. Then it was all mached together.


I cut some thin corrugated cardboard in the shape of the leaf and paper mached it into place. Then I added some veins using pasted paper towels that i laid down to add dimension. Wait for everything to dry and paint in whatever colors you wish, For this plant i used greens and burnt siennas for the body of the plant and some burgandy and black for the mouth region.  To finish this man eater  I added in a small skull, some some glue gun teeth and drool.  Seal with an outdoor sealer and your ready to add it to your Halloween display.  I kept his mouth open so that if i wanted to add lighting I could, or if I find I need to weigh it down i'll just add some sand. 

Thursday, October 1, 2015

DIY Haunted Halloween prop paper mache pumpkins

People are always asking questions about these wonderfully frighting pumpkins so I thought I would share some trade secrets so that you can construct your own. These pumpkins have been to h*ll and back and have the scars to show for it. I was inspired by the pumpkin ideas from the Stolloween site. If you have never checked this site out, go now! He has the most AMAZING pumpkins and Halloween props around. This site also has recipes for paper mache and paper clay.
This is the recipe I use for my paper mache.
  • 1/3 cup flour
  • 2 tbsp rice flour
  • 2 tsp salt
  • 1 tsp baking soda
  • 2 cups boiling water
  • 1 cup cool water

1. Mix the dry ingredients.
2. Mix in the cool water with a fork or whisk, adding the water a little at a time to keep it as smooth as possible.
3. Stir the flour mixture into the boiling water.
4. Allow it to boil for two or three minutes.

This can be stored in the fridge for a few days, just stir it up and you are ready to use it again. 
I find this to be the most creamy, non clumping recipe I have ever used.
 
These are the tortured pumpkins I have done over the past few years.




Special features and how they were created:
These hellish pumpkins have been outfitted with an outer dressing of cheesecloth and/or Kleenex over the paper strip layer- for the effect of peeling and wrinkled layers of skin, 
they also have chains binding their - these are formed by cutting lengths of pipe cleaner, forming them into links and attaching them into the paper mache
and I also added embedded drywall screws into their structures - you can use anything, this is just what I had laying around. 
Also if you look really close you will be able to see "foam strip" stitches that have been embedded in one of the skulls of the pumpkin - for these i just cut small strips of fun foam, crossed them and embedded them in the layers of mache. These will not be going anywhere. 
Once you are satisfied with the way your pumpkin looks they are ready for painting. I used a mix of red, light orange and dark orange, then I antiques with black paint.
Wait till dry and seal with outdoor sealer.
To antique an item is to water down the black or brown paint. Apply and rub off. This will settle the dark color into the crevices, highlighting the details.  


Sunday, September 27, 2015

DIY Halloween Prop Mausoleum Markers with Funny Epitaphs for your garage

When you lack a "front door" you have to draw the crowds in some how. So our show stopper this year will be the Mausoleum for the from of the garage. A very quick and effective Halloween project that is sure to be a conversation piece among the neighbors. You will notice that there are 2 empty spots these will be saved for a dead body and an empty spot. 
These super easy faux stone markers are made from 1 inch foil backed insulation sheets. I purposefully used these because they can take spray paint, hot glue and writing. 
From 1 sheet I managed to get 22  9*21 inch blocks which fits perfectly into the "framed" spaces.  Then I lightly sprayed the foil side with black spray paint, this allows a little of the silver to show through, which add dimension. Then I took my oil pencil and added the wording, nothing fancy and not all the same. I did use some stencils for some and free handed others. Using the wax pencil also makes it weather proof alleviating the step of sealing these :) Then I glued 2 magnetic buttons to the back of each block. This makes it very easy set up and take down. 
There you have it Quick and Easy Mausoleum for the dreaded front garage. :) 



















Monday, October 20, 2014

DIY Paper Doll Costume

 
This is my Halloween Paper doll Costume this year. It will be completed with anime doll makeup and a big red buffon wig.  

This is an easy no sew, last minute Halloween costume idea. Here is how mine came together.

Supplies;  2 pieces of poster board. This color choice will all depend on your outfit. I chose white as I knew I would be painting it.
                 pencil 
                 scissors
                 a formfitting outfit you already own
                 sharpie or other permanent marker 
                 paint or decorative tapes to color in designs
                 stapler and staples
                 elastic
                 straight edge

1.  Go searching for outfit inspiration, just don't go too long or too fancy. It is was easier walking in a two piece outfit above the knee than a long dress. This costume does not bend very well. Also you are going to be coloring this in so the pattern should be something your comfortable working with. 

2. Lay out an outfit you already own on the poster board to get your size parameters. Lightly trace around your existing outfit with pencil and remove. Now construct your paper doll outfit within the parameters you just established.

3. Remember to add tabs using your straight edge,

4. Now color or paint in your pattern and design.


5. Go back and outline your dress and tabs in sharpie.
6. Cut out your dress/ outfit.
6. Take your elastic and attach 1 piece around the waist of your skirt. so it can be slipped on and off. Remember to leave a little more wiggle room if it is going to be going over your winter gear. And attach 2 more pieces of elastic from each shoulder to just under the underarms. So it fits like your putting your jacket on backwards,
7.  Try on, add makeup, a wig and a paper accessory and you are done.
Ill make sure I get a picture on Halloween with makeup and do an update. I hope this inspires you to try one out too.
Remember sharing is caring. (referral affiliate link- all that means is that if you click on the image, and decide to purchase, I would receive a teeny tiny %. There is no cost to you by using my referral link)